ABS Plastic Line Level /Block Square Bubble Level Vial/Plumb-Line Spirit Level/Spirit Level/High Visibility Plastic Line Level/String Line Level

• Customization: Available
• Model NO.: Plastic Line Level

Product Description

Line Level

Line levels (or "string" levels) are a special brand of spirit level used for leveling across longer distances. They can be attached to a tightly pulled string to find level between two stakes in the ground to find level ground. Line levels are a much more cost-conscious alternative to line laser levels, but require a bit more preparation and patience to ensure the job gets done right. 

Product Description

• Shell: Moulded ABS plastic body with pocket clip.The hollow plastic shell make line level readable from top, side, or bottom, also make it lightweight to reduce line sag for accurate reading.
• Bubbles: Made of Solid acrylic shockproof vials materials, clear, precision, easy to read. Fluorescence for dark places.
• Hooks: With Special molded hooks to enable the level to be hung from a builders line. Open-style to allow mini bubble level sliding along the lines freely. Opposite design for minimizing dropping off the line.
• CLIP & V-GROOVE: This hanging line level has a clip for attaching to a pocket, easy to take and store when working. V-shaped groove at the bottom provides reliable seating when leveling round items such as pipe, conduit, and shafts
• String Line Level used to measure level for hanging picture frame, construction site straight woodworking survey measurement, bricklaying, balcony, fencing, building trades, surveying, engineering, plumbing,conduit, guttering, shafts, tiling, pipe, etc.

Detailed Photos

 

How to Use a String Line Level

1. Gather the materials for the job: a line level, a length of string, a tape measure and some means of securing both ends of the string (usually two wooden posts in the ground).
2. Secure the string to one side or corner of the area you want leveled.
3. Attach the line level to the middle of the string using the small hooks on the line level.
4. Pull the string tight while sliding the level up the string within eyeshot.
5. Pull tightly enough to avoid any sag in the string. Even the slightest dip in the string will negatively affect your reading.
6. Hold the end of the string against the post or wall and adjust up and down until the bubble rests between the black lines on the line level.
7. Secure the string.
8. You have found level between the two points. You can use these marks on the posts or walls to make further measurements for your home construction projects.